(1) The amount of lubrication added should be appropriate
However, depending on the situation, sometimes it is necessary to apply grease on the edge of the bearing to implement cavity lubrication.
(2) Pay attention to prevent the mixing of different types, brands and old and new greases
Avoid cross use of grease containers and tools, otherwise, it will have adverse effects such as drop point drop of grease, increase of cone penetration and decrease of mechanical stability.
(3) Pay attention to the replacement of new grease
Since the variety and quality of grease are constantly improving and changing, when using new grease for old equipment, it should be tested first, and then can be used formally; when replacing new grease, waste grease should be removed first, and parts should be cleaned. clean. When adding grease, the waste grease should be squeezed out until new grease is seen at the grease outlet.
(4) Pay attention to the management of the grease filling process
Before receiving and refilling grease, strictly pay attention to the cleaning of containers and tools. The grease supply port on the equipment should be wiped clean in advance to prevent the mixing of mechanical impurities, dust and sand.
(5) Pay attention to the timely replacement of seasonal grease
For example, the temperature difference between winter and summer in the environment where the equipment is located varies greatly. If winter grease is used in summer or vice versa, the result will be counterproductive.
(6) Pay attention to regular replacement of grease
The time of adding and replacing the grease should be determined according to the specific use situation, so as to ensure reliable lubrication without causing waste of grease.
(7) Do not pack grease in wooden or paper containers
Prevent oil from hardening, mixing with water or being contaminated and deteriorated, and should be stored in a cool and dry place.
