Usually, the measuring tool to be used for scientifically testing the diameter of stainless steel wire rope is a caliper, and the diameter of stainless steel wire rope can be scientifically measured by using a caliper. In specific use, the claw distance of the caliper needs to be enough to span two adjacent rope strands to achieve the purpose of smooth measurement. When measuring, it is also necessary to know that the actual measurement needs to be carried out on a straight unloaded stainless steel wire rope.
The inspection of the diameter of the stainless steel wire rope needs to be the data under no tension and needs to be carried out at two points at least 1 m apart from each other at a suitable distance from the rope end. At the same time, it is necessary to be able to measure two diameter data vertically in different directions, and then the average diameter value can be calculated using the data of 4 measurements. As for the numerical calculation of the ellipticity of the stainless steel wire rope, it is enough to subtract any two values from these four measurements. Of course, this is a traditional inspection method. Although the operation may be relatively complicated, the accuracy rate is high, and the cost of investing in inspection equipment is relatively low.
In addition, the current measuring instrument for inspecting the diameter of stainless steel wire rope also has a diameter measuring instrument, which can directly measure the diameter of stainless steel wire rope without touching the object to be measured. The device uses the principle of laser beam, and the detection range is between 1-80mm. If a halogen beam detector is used, the inspection range can be between 0-25mm, and you can choose the instrument according to the inspection range.
https://www.jhrope.com/
