(1) The service life of the wire rope has a great relationship with the method of use, so it should be used in accordance with the regulations, and it is forbidden to drag,
Throwing, do not overload during use, do not bend the wire rope at an acute angle, do not change the lifting speed sharply, and avoid impact
load
(2) When there is rust and dirt on the wire rope, brush it off with a wire brush and apply oil
(3) The steel wire rope should be oiled once every 4 months of use. When oiling, it is best to soak the rope core with hot oil (about 50 ℃), and then wipe it off.
excess oil
⑷ After the wire rope is coiled, it should be placed in a clean and dry place, and should not be stacked to prevent sprains.
⑸The end of the steel wire rope is fastened with steel wire or welded with alloy with low melting point, or it can be fastened with iron hoop to prevent the rope head from loosening.
⑹ During use, if oil droplets are extruded on the surface of the wire rope, it means that the wire rope has been subjected to considerable force, and it should be stopped at this time.
Increase the load, and check, if necessary, replace the new wire rope.
⑺The carrying capacity of the traction wire rope should be 5-8 times of the total traction force.
